Blog

Everything You Ever Wanted to Know About Septic Systems - But Were Afraid to Ask


Posted: November 29, 2019 by Karen Johnson

In our more rural areas where houses are spaced so far apart that a sewer system would be too expensive to install, people install their own, private sewage treatment plants. These are called septic tanks.

A typical septic system consists of a septic tank and a drainfield, or soil absorption field. The septic tank digests organic matter and separates floatable matter (e.g., oils and grease) and solids from the wastewater. Soil-based systems discharge the liquid (known as effluent) from the septic tank into a series of perforated pipes buried in a leach field, chambers, or other special units designed to slowly release the effluent into the soil.

So here are the basic Facts:

­

A septic tank is simply a big concrete or steel tank that is buried in the yard. The tank might hold 1,000 gallons (4,000 liters) of water. Wastewater flows into the tank at one end and leaves the tank at the other. Inside the tank are three layers: Anything that floats rises to the top and forms a layer known as the scum layer. Anything heavier than water sinks to form the sludge layer. In the middle is a fairly clear water layer. This body of water contains bacteria and chemicals like nitrogen and phosphorous that act as fertilizers, but it is largely free of solids.

Wastewater comes into the septic tank from the sewer pipes in the house. A septic tank naturally produces gases (caused by bacteria breaking down the organic material in the wastewater), and these gases don't smell good. Sinks therefore have loops of pipe called P-traps that hold water in the lower loop and block the gases from flowing back into the house. The gases flow up a vent pipe instead -- if you look at the roof of any house, you will see one or more vent pipes poking through.

As new water enters the tank, it displaces the water that's already there. This water flows out of the septic tank and into a drain field. A drain field is made of perforated pipes buried in trenches filled with gravel.A typical drain field pipe is 4 inches (10 centimeters) in diameter and is buried in a trench that is 4 to 6 feet (about 1.5 m) deep and 2 feet (0.6 m) wide. The gravel fills the bottom 2 to 3 feet of the trench and dirt covers the gravel. 

The water is slowly absorbed and filtered by the ground in the drain field. The size of the drain field is determined by how well the ground absorbs water. In places where the ground is hard clay that absorbs water very slowly, the drain field has to be much bigger.

A septic system is normally powered by nothing but gravity. Water flows down from the house to the tank, and down from the tank to the drain field. It is a completely passive system.

Pretty simple isn’t it! Just make sure that you keep foreign objects like toys and your mothers priceless engagement ring (true story), pump the tank every two years and have your pumping company periodically give the tanks a visual inspection and you should have a well-functioning system.

Loading Comments
Real Estate Links Our Domains